PN: 0.875THSC Category: .

Product Description

0.875THSC Self-Centering SMR Adapters

Conical plunger centers itself on multiple diameters

The 0.875THSC magnetic adapter is used to gather quick data points over a range of hole sizes using a single adapter.  The secret is a spring-loaded, cone-shaped, locating plunger (see illustration below). This adapter will locate on hole sizes 0.100″ to 0.625″ (2.5mm to 15.9mm). Keep in mind that we can also make these adapters to fit other hole diameters on request. Three strong magnets on the bottom keep the adapter squarely on any ferrous surface, and counteract the spring-loaded force of the plunger. The adapter is reliable and repeatable. A knurled profile around the outer perimeter assists in removal after measuring is finished. The adapter holds the centerpoint of a 0.875″ diameter SMR 1.500″ (or 40mm for the metric version) above the surface of the part and on centerline of the hole to a tolerance of ±0.0005″ (±0.013mm). The SMR seats on a conical land and is held in place by a magnet.
 
Model Offset “A”
English 0.875THSC-1.5 1.500″
Metric 0.875THSC-40MM 40 mm
 

May Be Used With

Any 0.875″ diameter SMR

Specifications

Adapter dia.: 1.600″ (40.6mm)
Material: Stainless steel
Fits hole sizes: 0.100″ to 0.625″ (2.5mm to 15.9mm)
Offset tolerance: ±0.0005″ (±0.013mm)
Target centering tolerance: ±0.0005″ (±0.013mm)
Hardness: HRC 42-45

 


Documents

English (PDF)

 


PDF Download Drawing

Brunson 0.875THSC drawing

PN: 0.875THSC Category: .