800-MOD Precision Lift & Adapter
Put a Precision Lift on any 3½”-8 mount
The 800-MOD provides precise control of vertical motion throughout approximately ½” (13 mm) range. It is generally used for fine vertical positioning after the instrument height has been roughly established using the stand’s lift column. A large diameter, fine-motion screw allows minute height adjustments of previously leveled instruments fast and easy, while minimizing the need to re-level the instrument. Internal guideways also minimize any azimuth (rotational) shifting. On top, a 235-12 adapter fits into the 800 precision lift and provides the interface for any 3½”-8 instrument.
May Be Used With
Approx. effective height:
10″ to 10.5″ (254 to 267mm) – this is the vertical distance between the lower interface surface at the very bottom of the unit and the bottom of an instrument which is mounted on top of the unit
800 Precision Lift: Black oxide and stainless steel
15084 Adapter: Black textured finish enamel
235-12: Stainless steel
Approx. weight: 24 lbs.