Brunson 239-0 Pedestal Stand

Product Description

239 Series Pedestal Stands

For Permanent Installations

The 239 Series consists of pedestal stands which are similar to our popular heavy-duty mobile stands except that they do not have an intermediate tube which may be raised or lowered. Other than the adjustment provided by any adapters which are mounted on the stand, the height is fixed. The 239 is available in several configurations. The standard height of this stand is 40 5/8″ (103 cm), as measured from the floor to the top of the main outer tube, on top of which all instrument mount accessories are attached. However, the stand may be ordered at any custom height specification. 

A variety of stand adapters, slides, lifts, and various instrument mounts fit into the intermediate tube. 

The baseplate is a 1″ (2.54cm) thick steel plate with a diameter of 15″ (38.1cm). Four 1-1/16″ (2.7cm) mounting holes are equally spaced on an 11″ (27.9cm) diameter bolt circle on this baseplate. It is also outfitted with four 5/8″-11 UNC-2B threaded leveling screws on a 14” (35.6cm) diameter bolt circle to provide a means for adjustment to set the stand vertical.

Stands in this group are used for permanent installations of all types of metrology instrumentation, and are often used in test, calibration, or constant monitoring applications.

Standard options for 239

Model and Height Description Adapter
239-0

41.6″

105.7 cm

Model 239STK with 235-3 hollow adapter having 3 1/2″ – 8 thread (shown right). The
235-3 adds 0.975″ (24.8 mm) to the stand height.

May Be Used With

Virtually any instrument or adapter having an internal 3½”-8 thread
Many of our stand accessories and instrument adapters

Specifications

Finish: Black; other finishes available on request