Category: . Tags: , , .

Product Description

705, 705-1, and 709 Bull’s Eye Targets

Bull’s Eye targets in two diameters

The 705 and 709 bull’s eye target patterns are machine-engraved and black-filled on a circular white plexiglas blank. The pattern has a center dot surrounded by two concentric circles. They may be backlit for additional visibility in low-light applications. Backlighting this target when used as the far target in a line of bore targets gives a great diffuse backlight for the other targets in the line. The 705 is 2¼” (57.2mm) diameter and may be used in our spherical targeting systems. The 709 is 1½” (38.1mm) in diameter. These targets have holes drilled through on the target’s diameter for mounting and to facilitate target removal from tight spots. We have other similar targets on this website. Note: The 705-1 obviously cannot be backlit.
The 709 (left) and 705 (right) differ only in diameter and mounting hole size.

The 709 (left) and 705 (right) differ only in diameter and mounting hole size.

The 705-1 is aluminum rather than plexiglas, but is identical to the 705 in all other respects.

The 705-1 is aluminum rather than plexiglas, but is identical to the 705 in all other respects.

Model Diameter Material
705 2 1/4″ (57.2 mm) Plexiglas
705-1 2 1/4″ (57.2 mm) Aluminum
709 1 1/2″ (38.1 mm) Plexiglas

Specifications

Target diameter:
705 and 705-1: A.I.A. standard diameter, 2.2498″ – 2.2493″ (57.145mm – 57.132mm)
709: 1.4998″ – 1.4993″ (38.095mm – 38.082mm)
Mounting holes:
705 and 705-1: 0.1935″ (4.9mm) drilled through on 1.880″ (47.75mm) between centers
709: 0.1285″ (3.3mm) drilled through on 1.250″ (31.75mm) between centers
Target pattern:
Centered with respect to the diameter within 0.001″ (0.025mm), T.I.R.
Thickness:
Nominally 3/8″, actual thickness may vary due to nature of material
Finish:
705 and 709: None
705-1: Clear anodize
Max sustained operating temperature (for plexiglas targets): 190°F (87°C)

Documents

English (PDF)

Category: . Tags: , , .