|
|
|
Flexible Use, Heavy Duty Portable Stand Kit
|
 |
|
|
Our 810 is a heavy duty portable stand
which may be assembled by the user into a variety of
configurations. It consists of a number of components
which give you the flexibility to "build" the stand
to the specification of any job which calls for portable or
unique setups. It is relatively lightweight and
disassembles for mobility, yet is extremely rigid while being
used. Various combinations of the 810's components allow
instrument mounting heights of 2"
to 55½" (5 - 141 cm)
from the floor. The stand allows you to make precision
vertical and horizontal adjustments to solve a multitude of
instrument location problems. [In case you're scratching
your head, an instrument height of 2" is possible by
installing the instrument mount tube - and the instrument - upside
down between the legs of the stand.]
The 810 comes with a set of short legs, a set of long legs,
and a set of trivet points that may be mounted directly in the
three sockets on the tribrach plate, for setting the stand almost
directly on the floor or other work surface. It is also supplied with a short
and long intermediate tube. The photo above (right) shows the
stand with the long legs and long intermediate tube; the photo
below (left) shows the stand with the short legs and short
intermediate tube.
|
|
Left: The 810 stand assembled with the short
instrument mount tube and the short legs.
Right: The 810 comes in a sturdy polyethylene case with foam
inserts to hold all parts securely.
|
|
A number of our stand adapters, slides, lifts, and various instrument
mounts fit on the stand. Almost anything will fit on it
because it is equipped not only with the 3½" x 8 standard external
instrument mount threads, but also our dovetail receptacle and
the 2.825" x 20 internal thread found on many of our
intermediate tubes. For a trimmed down version of this stand, have a look at our
801-1. |
|
Standard Components Included |
| Qty |
Description |
Qty |
Description |
| 1 |
802 precision cross slide |
3 |
26" (66 cm) tubular aluminum legs with
steel tips and pivot mounts |
| 1 |
800 precision lift |
3 |
10" (25.4 cm) tubular aluminum legs with
steel tips and pivot mounts |
| 1 |
Hard-anodized aluminum instrument mount
(intermediate) tube, 21"
(53.3 cm) |
1 |
Rugged high-density polyethylene case with foam
inserts for storage or shipping complete kit. |
| 1 |
Hard-anodized aluminum instrument mount
(intermediate) tube, 10½"
(26.7 cm) |
1 |
Cast aluminum tribrach and collar with worm
gear height adjustment |
| 3 |
1" (2.5 cm) trivet point legs with pivot mounts |
1 |
Wrench set |
Height range: 2" to 55½" (5 - 141 cm)
Finish: Machine gray |
Approximate weight: Stand (all components, together with case),
89 lbs (40.3 kg); Shipping, 92 lbs (41.7 kg) |
|
