|
800-MOD Precision Lift & Adapter
|
|
|
Put a Precision Lift on any 3½ - 8 mount |
 |
|
|
Installing a model 800 precision lift on a standard
3½" x 8 instrument mount is easy with the 800-MOD.
This assembly consists of an 800
precision lift, a 235-12
adapter, and a 15084
base. This product replaces the 5060 precision lift
and allows you to easily outfit any of your Brunson or
old-style K+E (Cubic Precision) stands with precision lift
capability.
The 800-MOD provides precise control of vertical motion throughout
approximately ½" (13 mm) range. It is generally used for
fine vertical positioning after the instrument height has been roughly
established using the stand's lift column. A large diameter,
fine-motion screw allows minute height adjustments of previously
leveled instruments fast and easy, while minimizing the need to
re-level the instrument. Internal guideways also minimize
any azimuth (rotational) shifting. On top, a 235-12 adapter
fits into the 800 precision lift and provides the interface for
any 3½" x 8 instrument.
You can see a list of all of our instrument
adapters, or look at an entire list of
heavy duty or
portable stands, on this website.
|
|
Effective height: Approx. 10" to 10.5"
(254 to 267mm). This is the vertical distance between the lower
interface surface at the very bottom of the unit and the bottom of
an instrument which is mounted on top of the unit. |
Finish: Black oxide and stainless steel (800 precision lift);
black textured finish enamel (15084 Adapter); and stainless steel 235-12).
Approximate weight: 24 lbs. |
|
