|
|
|
Coordinate lateral control for your instrument
|
 |
|
|
The 273-4 Coordinate Lateral Adjuster provides
fine-threaded coordinate control of an instrument in any
horizontal direction. It can be used on our collimation test
stands for calibration procedures requiring instrument
centering over a known point, or on our instrument stands
for alignment to known points in a vertical orientation (as
may be the case with vertical pumps, flow control gates on
hydroelectric power applications, etc.). In addition,
however, any number of application problems may be solved
using this type of adjuster. The 273-4 fits into the intermediate
tube of most Brunson
instrument stands. It also has a provision to mount a
395 or
similar target for vertical line-of-sight applications.
|
|
The coordinate lateral adjuster allows full 2-dimensional control of
your instrument, and includes a plummet sight with target mount capability. |
|
|
Effective height: (The vertical distance between the lower interface
surface and the bottom of an instrument which is mounted on top of
the unit: 1.375" (34.9 mm)
|
Approx. weight: Base, 15 lbs; shipping, 17 lbs.
|
|
xSmall.jpg)