|
1.5THNDN "Negative" Drift Nest
|
|
|
For the down-low all the way around |
PDF |
|
|
The 1.5THNDN is a drift nest with a negative viewing
angle all the way around. It will allow you to tip the SMR down to
achieve a viewing angle as low as -21°. The
1.5THNDN provides axial rotation of the SMR through 360°.
The drift nest (sometimes called a
"hockey puck"), provides a temporary, magnetic SMR adapter
in almost any location
and on almost any surface. The back of this
adapter is flat. The magnet is intended to hold the
SMR in place but does not hold the adapter in its
location.
Use any general adhesive (we often use a hot glue gun) to attach these adapters
temporarily to machine tools, concrete floors and pillars, posts, stands, or
just about anything else that is available. To aid in removal, use a flat
bladed screwdriver in the pry slot provided on the bottom. Works with a
1.5" diameter SMR. You may wish to
look at our other drift nests,
1.5THDN or the
1.5THEDN.
|
|
Adapter size: Main body is 1.6"
(40.6mm) diameter by 0.44" (11.2mm) thick
Distance to Center of SMR: Approx. 1.125" above
base of the adapter |
Material: Aluminum
Finish: Hard anodized (black)
|
|
