|
1.5TH Series SMR Adapters |
 |
|
|
For use with 1.5" SMR |
PDF   |
|
|
The 1.5TH Series magnetic adapters provide an SMR nest which mounts
in holes having a diameter of 1/8" - 5/8" or 4mm to 15mm. Shank
diameters are held to close tolerances (−0.0001" to
−0.0005") for precision slip fits. The adapter holds the
centerpoint of a 1.5" diameter SMR 1.000" (or 25mm) above the surface of the part and on
centerline of the shank to a tolerance of ±0.0005"
(0.013mm). The SMR seats on a 3-point conical
land and is held in place by a magnet. An optical alley
allows the SMR to be rotated down for a lower shooting angle.
Construct the desired part number using the information below, or
make up your own - we don't have room to show all possible sizes! |
 |
Part Number
Construction: |
| Shaft dia. |
B |
Shaft dia. |
B |
| 0.100" |
.1 |
4mm |
4MM |
| 1/8" |
.125 |
5mm |
5MM |
| 3/16" |
.1875 |
6mm |
6MM |
| 1/4" |
.25 |
7mm |
7MM |
| 5/16" |
.3125 |
8mm |
8MM |
| 3/8" |
.375 |
9mm |
9MM |
| 7/16" |
.4375 |
10mm |
10MM |
| 1/2" |
.5 |
11mm |
11MM |
| 9/16" |
.5625 |
12mm |
12MM |
| 5/8" |
.625 |
13mm |
13MM |
| 3/4" |
.75 |
14mm |
14MM |
| 7/8" |
.875 |
15mm |
15MM |
1" |
1 |
|
|
|
 |
| Offset |
A |
| 1.000" |
1 |
| 25 mm |
25MM |
Choose an "A" value above, and pair with desired "B"
value (at right) to create the item number for the product that
you want. E.g., 1.5TH-1-.375 |
|
|
|
Adapter dia: 1.6"
Material: Stainless steel
Shank diameter tolerance: −0.0001" to −0.0005"
(−0.003mm to −0.013mm)
|
Offset tolerance: ±0.0005" (±0.013mm) Target centering tolerance: ±0.0005" (±0.013mm) Hardness: HRC 42-45 |
|
|
|
