|
0.5THC SMR Retainer Clamps
|
|
|
SMR retainers with vertical or horizontal freedom of
motion |
PDF |
|
|
Our 0.5THC-V (vertical) and 0.5THC-H
(horizontal) SMR retaining clamps gives you another
way to protect those valuable SMRs from damage. Put
the SMR in the target nest, then slip the retainer over the SMR. Then use the flat-tipped M3 set screws to secure the clamp to the target holder.
The 0.5THC-H clamps
allow the SMR to rotate horizontally, with a 200° range of
motion. The 0.5THC-V
clamps allow the SMR to rotate vertically, with a 90° range of motion (allowing the SMR to
point straight up). All 0.5THC models fit 0.5" SMRs,
but the diameter of the pin nest must also be considered
when choosing the desired model (see table below).
|
 0.5THC-H |
The 0.5THC-H (left) captures the SMR but
allows it to rotate horizontally.
The 0.5THC-V (right) captures the SMR but allows
it to rotate vertically.
|
Model |
For SMR Size |
For target holder dia. |
|
0.5THC-V-.5 |
0.5" |
0.5" |
|
0.5THC-H-.5 |
0.5" |
0.5" |
|
0.5THC-V-.75 |
0.5" |
0.75" |
|
0.5THC-H-.75 |
0.5" |
0.75" |
|
 0.5THC-V |
|
Set screws: M3 (2 each)
Range of SMR rotation: 200° for horizontal
("-H") models; 90° for vertical ("-V") models
Material: Aluminum (no finish)
|
| Physical size |
| Model |
Dia. [mm] |
Height [mm] |
| 0.5THC-V-.5 |
0.75" [19] |
0.5" [12.7] |
| 0.5THC-H-.5 |
0.75" [19] |
0.69" [17.5] |
| 0.5THC-V-.75 |
1" [25.4] |
0.5" [12.7] |
| 0.5THC-H-.75 |
1" [25.4] |
0.69" [17.5] |
|
|
- 0.5THC-.5 models retain a 0.5" diameter SMR mounted in a
nest having a 0.5" diameter
- 0.5THC-.75 models retain a 0.5" diameter SMR mounted in a
nest having a 0.75" diameter
|
|
